0CodeKit and Alchemy Integration

Demonstration of how apps are integrated in WEXTL workflow builder[4]

Build developer tools workflows between 0CodeKit and Alchemy on a visual canvas. Set up data fields sync between apps once and let data flow when events come automatically. Integration will work without code and your team will see the workflow inside WEXTL® builder.

  • 3-day trial
  • Cancel anytime
  • Up to 10 minutes quick set up
  • GDPR
  • Data Encryption
  • 2FA
  • Local Data Region

Learn about 0CodeKit and Alchemy

Detailed info you need to know about 0CodeKit and Alchemy integrations in WEXTL. Explore which modules apps support and how you connect them.

  • 0CodeKit

    • Developer Tools
    • 60 searches
    • 88 actions

    PDF, image, AI, data validation and conversion tools for automations.[5]

  • Alchemy

    • Developer Tools
    • 1 trigger
    • 113 searches
    • 13 actions

    Blockchain data and node APIs: balances, NFTs, prices, transfers, webhooks and JSON-RPC.[6]

How to connect 0CodeKit to Alchemy

Set up your 0CodeKit and Alchemy integration in 3 simple steps[2]. No coding required. Up to 10 minutes setup.

How does the integration between 0CodeKit and Alchemy work in WEXTL?

WEXTL exposes actions and triggers for 0CodeKit and Alchemy that help you connect apps and automate repetitive tasks[1]. A trigger is an event that happens, and an action is a step that performs when the event has occurred.

Alchemy triggers0CodeKit actions

Alchemy modules

  • Watch Events (Instant) Starts the workflow each time Alchemy sends an event to the webhook, with its Webhook ID, Event ID, Type, Network and Activity.
  • Add or Remove Webhook Addresses Edits the watched addresses of a webhook in place. Use Addresses to Add to start watching more addresses and Addresses to Remove to stop watching some.
  • Call a Contract Runs a read-only call against a smart contract at the To address with the encoded Data, and reads the Result without sending a transaction. Choose a Block to run it against past state.
  • Call a JSON-RPC Method Sends any JSON-RPC Method of the chosen chain with its Params, for calls that have no dedicated module. Set Custom Network to reach a chain missing from the list.
  • Check a Solana Blockhash Tests whether a Blockhash can still be used in a new transaction, at the chosen Commitment.
  • Check If a Contract Is Spam Asks Alchemy whether the contract at Contract Address is flagged as spam and returns Is Spam Contract.
  • Create a Webhook Variable Saves a list of addresses or 32-byte hex values under a Variable Name so custom webhook queries can use it.
  • Debug Trace a Block by Hash Traces every transaction of one block by Block Hash, giving one result per transaction. Add a Tracer, and set Only Top Call to skip inner calls.
  • Debug Trace a Block by Number Traces the transactions of the block at Block, one result per transaction. Add a Tracer for the trace format and Limit to bound the list.
  • Debug Trace a Call Simulates a call from From to To and traces its execution without sending it. Add State Overrides to rewrite account state first, and Gas, Gas Price and Value to shape the call.
  • Debug Trace a Transaction Replays a mined transaction by its Transaction Hash and returns the execution trace. Use Timeout to stop a slow trace.
  • Debug Trace Several Calls Runs Bundles of calls one after another on top of a Block and traces each. Set Transaction Index to start in the middle of that block.
  • Delete a Webhook Variable Deletes a custom webhook variable and returns Deleted to confirm.
  • Estimate Gas Works out how much gas a transaction would use without broadcasting it. Use Value to include an amount in wei and Data to include call data.
  • Estimate User Operation Gas Estimates the gas limits for an account abstraction User Operation sent to an Entry Point. Add State Override Set to simulate changed account state.
  • Filter Traces Finds traces that involve From Addresses or To Addresses, between From Block and To Block. Page through them with After and Count, and cap the list with Limit.
  • Get a Balance Reads the native coin balance of an Address, at the latest block or at an earlier Block.
  • Get a Block Fetches a block by number or tag. Turn on Full Transactions to get complete transaction objects instead of hashes.
  • Get a Block by Hash Finds a block via its Block Hash. Turn on Full Transactions to include whole transactions instead of only their hashes.
  • Get a Raw Block Fetches the RLP encoded bytes of a whole block with no decoding applied.
  • Get a Raw Block Header Returns only the RLP encoded header of a block, without its body.
  • Get a Solana Account Reads the stored data of a Solana Account. Set Encoding for the data format and Commitment for how final the state must be.
  • Get a Solana Asset Looks up one Solana digital asset by Asset ID. Turn on Show Collection Metadata to include collection details and Show Fungible Tokens to include fungible tokens.
  • Get a Solana Asset Proof Returns the Merkle proof of the compressed asset with this Asset ID.
  • Get a Solana Balance Reads the SOL balance of an Account at the chosen Commitment level.
  • Get a Solana Block Fetches the block at a Slot. Use Transaction Details to control how much transaction data comes along and Max Supported Transaction Version to allow newer formats.
  • Get a Solana Priority Fee Estimate Suggests a priority fee from a Transaction or from a list of Account Keys. Use Priority Level to ask for one tier, or turn on Include All Priority Fee Levels to get the estimate for every level.
  • Get a Solana Token Account Balance Reads the token amount held in one Token Account, such as a wallet SPL token holding.
  • Get a Solana Token Supply Reads how many units exist in total of the token with this Mint.
  • Get a Solana Transaction Fetches a confirmed transaction by its Signature. Set Max Supported Transaction Version to read newer versioned transactions and Encoding to change how the data is returned.
  • Get a Storage Value Reads the raw value held in one storage Slot of the contract at Address, at a chosen Block.
  • Get a Token Allowance Tells how much of a Token Contract the Spender may still move on behalf of the Owner.
  • Get a Trace Returns the trace at the Trace Indexes position of the transaction with this Transaction Hash.
  • Get a Transaction Looks up a transaction by Transaction Hash and returns its fields.
  • Get a Transaction by Block Index Picks the transaction at position Index inside the block at Block, without needing its hash.
  • Get a Transaction Count Counts the transactions sent from an Address, which is also its next nonce, at an optional Block.
  • Get a Transaction Receipt Fetches the outcome of a mined transaction by Transaction Hash, with status, gas used and logs.
  • Get a User Operation Looks up an account abstraction operation by its User Operation Hash. Restrict the search with From Block and To Block.
  • Get a User Operation Receipt Fetches the receipt of an operation by its User Operation Hash, once it has been included in a block.
  • Get a User Operation Status Checks how far an operation has progressed, using its User Operation Hash.
  • Get an Account Proof Returns the Merkle proof of an Address at a Block, covering each of its Storage Keys.
  • Get Asset Transfers Searches historical transfers for the kinds listed under Categories, such as external or token transfers. Narrow by From Address, To Address and a block range, and turn on Exclude Zero Value to drop empty ones.
  • Get Block Receipts Lists the receipts of all transactions in the block at Block, each with its Status, Gas Used and Logs, up to Limit.
  • Get Historical Token Prices Returns the price history of a token between Start Time and End Time. Set Interval to space the points and turn on With Market Data to add market cap and volume. Name the token with a Symbol, or with a Contract Address and a Network.
  • Get Logs Collects event logs emitted by contracts, filtered by Addresses, Topics and a block range from From Block to To Block, up to Limit.
  • Get NFT Collections by Wallet Lists the NFT collections held by up to 2 wallets across up to 15 networks each. Use Order By and Sort Order to arrange the list, and turn off With Metadata for a smaller, faster answer.
  • Get NFT Contract Metadata Describes an NFT collection by its Contract Address, with Name, Symbol, Token Type and Total Supply.
  • Get NFT Contract Metadata in Bulk Looks up the Name, Symbol and Token Type of many NFT collections in one request, for many contract addresses at once.
  • Get NFT Contracts for an Owner Lists the collections held by an Owner wallet with their Total Balance and Num Distinct Tokens Owned. Add Include Filters or Exclude Filters to trim the list and Order By to sort it.
  • Get NFT Floor Prices Checks the lowest listing price of a collection on marketplaces such as Open Sea and Looks Rare. Identify it with a Contract Address or a Collection Slug.

0CodeKit modules

  • Add a Text Watermark to a PDF Writes Text across the pages of a PDF. Control its look with Font, Size, Color and Opacity, and tile it with Repeat and Spacing.
  • Add an Image Watermark to a PDF Stamps an image over the pages of a PDF, either once or tiled with Repeat. Place it with Anchor, X and Y, size it with Width and Height, and set Opacity and Rotate.
  • Add PDF Pages Inserts blank pages into a PDF. Use Pages to list the positions after which they go, and Width and Height to size them.
  • Blur an Image Blurs an image by the Sigma strength and returns the URL of the blurred copy.
  • Build a UTM Link Appends campaign tracking parameters from UTM to a URL and returns the finished link.
  • Calculate BMI Works out the body mass index from Weight in kilograms and Height in centimeters. It also reports the BMI Classification, Kcal and Nutrients.
  • Calculate Distance Measures the route between a Start Point and an End Point for a travel Mode, returning the Distance In KM and Duration.
  • Check a Content Policy Screens a Prompt against content policy and reports whether it is Safe.
  • Check a Freemail Address Tells whether an Email belongs to a free mailbox provider, and names the Provider.
  • Check a Rate Limit Acts as a traffic light under a Name. It lets a request through only after the Interval since the last allowed one and reports Ok.
  • Check a Weekend Checks whether a Date falls on a Saturday or Sunday, with Is Weekend and the Week Day. Use Time Zone for local dates.
  • Compare Strings Scores how alike two texts are, returning a Similarity and a Distance. Use Algorithm to choose the similarity method.
  • Compress a PDF Shrinks the file size of a PDF and gives you a link to the smaller version under File Name.
  • Concatenate Audio Files Joins several Audio files into one in the chosen Format, with Silence added in between if wanted.
  • Convert a Country Name and ISO Code Looks up the Nation name for an ISO code, or the ISO code for a Nation, in a single call.
  • Convert a Currency Changes an Amount from a Source Currency to a Target Currency and returns the Converted Amount.
  • Convert a DOCX to a PDF Converts a Word document into a PDF with 0CodeKit and returns its URL.
  • Convert a Markdown to a PDF Renders a Markdown String as a PDF, styled with Css.
  • Convert a PDF to an Image Renders the pages of a PDF as images and returns the Result.
  • Convert a PDF to Base64 Encodes a PDF as text and returns the PDF Base64 with its File Name.
  • Convert a Time Zone Moves an Input Time from the Input Time Zone to the Destination Time Zone. Use Format Pattern to shape the output.
  • Convert an Image Changes an image to the Output Format you want. Turn on With Meta Data to keep its metadata.
  • Convert an IP to a Location Looks up an IP address and returns its Country, Region Name, City and Zip.
  • Convert an Outlook Message to JSON Reads an Outlook MSG file and returns its content as a Result in JSON.
  • Convert CSV to an Array Parses CSV text split on the Delimiter into an Array of rows. Turn on Omit First Row to skip the header.
  • Convert CSV to JSON Parses CSV text and gives one object per row. Use Noheader, Trim and Ignore Empty to adjust how rows are read, and Delimiter to split the columns.
  • Convert HTML to a PDF Prints HTML, or a web page found at a URL, into a PDF. Use File Name to label the file.
  • Convert HTML to an Image Renders HTML, or the web page at a URL, into an image. Options adjust the rendering.
  • Count PDF Pages Counts how many pages a PDF holds and returns the Page Count, from a File URL or File Content (Base64).
  • Create a Global Variable Saves a Variable Value under a Variable Name in 0CodeKit storage. A name is generated when none is set.
  • Create a JSON Bin Stores a JSON document in a new bin and returns the Bin ID.
  • Create a Scheduler Task Schedules a webhook call that carries Data. Use Interval Type to run it once, on a Cron Expression or Every so often, until the End Date.
  • Create a Shortened URL Makes a short link for a Destination. Use Custom to choose the short identifier.
  • Create an Empty PDF Builds a blank PDF with a number of Pages at the chosen Width and Height.
  • Crop an Image Trims an image down to the area defined by Left, Top, Width and Height.
  • Cut Out an Image Background Removes the background of an image with AI and gives you the URL of the cut-out file.
  • Decode a Barcode Reads a barcode from an image and returns the Code it holds. Use Barcode to tell the reader which format to expect.
  • Decode a JWT Opens a Token and returns its Result. Turn on Verify, with a Secret, to check the signature.
  • Decode a QR Code Reads a QR code from an image and returns its Data.
  • Decrypt a PDF Unlocks a protected PDF with its Password and gives you the URL of the open copy.
  • Decrypt Text Turns a Ciphertext back into readable text using the Crypto Type and Secret Key.
  • Deduplicate a List Removes repeated entries from a List and returns what is left.
  • Delete a Global Variable Removes a global variable from 0CodeKit storage.
  • Delete a JSON Bin Deletes a stored JSON bin in 0CodeKit.
  • Delete a Permanent File Deletes a file from permanent storage in 0CodeKit.
  • Delete a Scheduler Task Removes a scheduled task from 0CodeKit.
  • Delete a Shortened URL Removes a short link from your 0CodeKit account.
  • Detect a Brand Spots logos in the image at an Image URL and lists the Brands it recognizes.
  • Detect a Color Analyses an image from its Image URL and reports its Dominant Colors, Accent Color and whether it Is Bw Img.
  • Detect a Face Counts the faces in the image at an Image URL, with the Total Faces and their Faces Position.

Explore alternative integrations

There are other apps[9] supported by WEXTL that can be paired with 0CodeKit and Alchemy integrations. Pick any from the list below if the current combination isn't the one you need.

Automate 0CodeKit and Alchemy on WEXTL®

Claim your 3-day trial to build 0CodeKit with Alchemy integration and access every WEXTL® feature.

Cancel anytime.

Frequently asked questions

Common questions about connecting 0CodeKit and Alchemy.

How do I connect 0CodeKit and Alchemy?

Connect your 0CodeKit and Alchemy accounts once, pick a trigger in one app and an action in the other, then map the fields so data flows automatically between them.[3]

What can I automate between 0CodeKit and Alchemy?

Example: when the "Watch Events (Instant)" trigger in Alchemy fires, WEXTL can "Add a Text Watermark to a PDF" in 0CodeKit. 0CodeKit has 148 actions (including Add a Text Watermark to a PDF, Add an Image Watermark to a PDF, and Add PDF Pages). Alchemy has 126 actions (including Add or Remove Webhook Addresses, Call a Contract, and Call a JSON-RPC Method). Add filters and transforms between steps when you need them.[1]

Can 0CodeKit trigger actions in Alchemy, and Alchemy in 0CodeKit?

Yes. The integration works in both directions. Use the triggers of each app to start a workflow and the actions of the other app to update it.[2]

Do I need to write code to integrate 0CodeKit and Alchemy?

No. 0CodeKit-to-Alchemy automations are built visually on the canvas. You can optionally add custom JavaScript with Functions when you need advanced logic.[4]

Does 0CodeKit integrate with Alchemy in real time?

Yes. Trigger-based automations start the moment 0CodeKit (or Alchemy) fires a new event. Webhook-backed apps run within seconds, and polling-only apps re-check on a schedule you control.[7]

How long does it take to set up a 0CodeKit + Alchemy integration?

A first automation typically takes 5–10 minutes: connect the credential of each app once, drop a trigger + action onto the canvas, map the fields, and turn the workflow on.

Do I need a paid plan to connect 0CodeKit with Alchemy?

You can build your 0CodeKit + Alchemy automation on a 3-day trial with every feature unlocked. Cancel anytime.[8]

References

List of sources used to gather information about the 0CodeKit and Alchemy integration.

  1. 0CodeKit and Alchemy integration source code, module specs and credentials implementation.
  2. Our 0CodeKit and Alchemy integration documentation, structured input and output parameters, scopes, and authentication methods.
  3. Official vendor API documentation for 0CodeKit and Alchemy, used to verify field meanings, authentication flows, and anything our own specs don't fully capture.
  4. WEXTL® visual workflow builder, anonymized data from our technical support team.
  5. 0CodeKit integration information
  6. Alchemy integration information
  7. WEXTL® Scheduling
  8. WEXTL® Pricing and Trial
  9. WEXTL® Apps Library

How we write our apps documentation

Explore how WEXTL® crafted 0CodeKit and Alchemy integration page documentation. Used sources, the role of AI, and how the team validates the result.

Explore 0CodeKit and Alchemy, or get started