ActiveTrail and Anthropic's Claude Integration

Demonstration of how apps are integrated in WEXTL workflow builder[4]

Connect ActiveTrail to Anthropic's Claude on visual integration builder following simple steps below. When marketing event fired from ActiveTrail, it will run actions inside Anthropic's Claude app - exactly how you set them in your ai automation. No coding skills required.

  • 3-day trial
  • Cancel anytime
  • Up to 10 minutes quick set up
  • GDPR
  • Data Encryption
  • 2FA
  • Local Data Region

Learn about ActiveTrail and Anthropic's Claude

Detailed info you need to know about ActiveTrail and Anthropic's Claude integrations in WEXTL. Explore which modules apps support and how you connect them.

  • ActiveTrail

    • Marketing
    • 3 triggers
    • 90 searches
    • 57 actions

    Email, SMS and WhatsApp marketing with automations.[5]

  • Anthropic's Claude

    • AI
    • 21 triggers
    • 60 searches
    • 81 actions

    Anthropic Claude models for reasoning, writing, and analysis.[6]

How to connect ActiveTrail to Anthropic's Claude

Set up your ActiveTrail and Anthropic's Claude integration in 3 simple steps[2]. No coding required. Up to 10 minutes setup.

How does the integration between ActiveTrail and Anthropic's Claude work in WEXTL?

WEXTL exposes actions and triggers for ActiveTrail and Anthropic's Claude that help you connect apps and automate repetitive tasks[1]. A trigger is an event that happens, and an action is a step that performs when the event has occurred.

ActiveTrail triggersAnthropic's Claude actions

ActiveTrail modules

  • Activate or Pause an Automation Publishes or pauses an automation. Turn on Active to publish and off to pause, and use Start At to publish later instead of now.
  • Add a Contact to a Group Puts a contact into a Group, or updates them when they are already in it. Give an Email, a Mobile Number or both, and set Email Status and SMS Status for the subscription state.
  • Add a Contact to a Mailing List Signs a contact up for a Mailing List and adds them to the Groups given for it. Use Email or Mobile Number to say who, and add a First Name and Last Name.
  • Add External Contacts to a Group Takes up to 1000 contacts from your own system and puts them in a Group, each found by External ID and External Name. Output includes Success and any Contact Errors.
  • Add External Contacts to a Mailing List Moves contacts already stored under your own IDs onto a Mailing List, in batches of up to 1000. Each is found by External ID and External Name, and failures are reported through Contact Errors.
  • Create a Campaign Creates an email campaign for chosen Groups with a Sender Profile and a Subject. Choose HTML Content or a Template as the Content Source. Turn on Send At Schedule Time to send at the Schedule Time, or leave it off to save a draft.
  • Create a Campaign for Contacts Builds a campaign aimed at individual people instead of groups. Provide Contact IDs, Contact Emails or both, plus a Subject and Sender Profile. Add a Preheader to show short text after the subject line.
  • Create a Campaign from a Template Creates a campaign from a saved Template with a Name, Subject and Sender Profile. Use Placeholders to swap text in the template content for your own values.
  • Create a Cart Records a shopping cart for a customer identified by External User ID, Email or Mobile Number. Fill Products with a Product ID each, and add a Cart URL to link back. Output includes Success and Errors.
  • Create a Contact Saves a contact on the account. Provide an Email, a Mobile Number or both, and use Custom Fields for extra data. Output includes the contact ID and State.
  • Create a Content Category Makes a category for organising campaigns. Use Display Order to place it in the category list and Is Default to make it the default one.
  • Create a Group Makes a new contact group under a Name. Output includes its ID, Counter and Created date.
  • Create a Lead Records a sales lead under your own Lead ID for a customer known by External User ID, with an Expected Purchase Date in UTC. Add Products, Total Amount or Location to describe the deal.
  • Create a Mailing List Adds a mailing list to the account under a Name. The list ID is returned.
  • Create a Template Saves an email template under a Name, with plain text or HTML as Content. For operational sending, add a Subject, Preheader and Classification.
  • Create a Template Category Adds a category for grouping templates under a Name. Output includes the category ID and Culture Code.
  • Create an Opportunity Records a sales opportunity under your own Opportunity ID, with an External User ID for the customer and an Expected Purchase Date. Add Quantity, Coupon or Products to describe what they may buy.
  • Create an Order Records a store order under your own Order ID. Use Purchase Date for when it was placed, in UTC, and Products to list what was bought.
  • Create an SMS Campaign Creates a text-message campaign for chosen Groups, from a Message and an Unsubscribe Text. Turn on Send Now to send right away, which cannot be undone, or set a Send Time and Time Zone to schedule it.
  • Delete a Campaign Deletes a campaign. A Deleted confirmation comes with its ID.
  • Delete a Contact Deletes a contact. The Deleted flag and ID confirm it.
  • Delete a Group Removes a group. Output includes its ID and a Deleted confirmation.
  • Delete a Mailing List Removes a mailing list and reports its ID with a Deleted value.
  • Delete a Template Removes an email template, then reports its ID and whether it is Deleted.
  • Delete an External Contact Removes a contact found through its External ID and External Name. Output includes both of them and a Deleted confirmation.
  • Delete Automations Deletes one or more automations in a single call. Output includes the IDs and a Deleted confirmation.
  • Estimate an SMS Campaign Works out how many messages an unsent text campaign would use, as Estimated Messages. Campaigns that were already sent cannot be estimated.
  • Find Contacts by Email or Phone Searches contacts by Email, Mobile Number or both and returns each match with its State, SMS State and Is Opted In values.
  • Get a Campaign Fetches a campaign in full, including its Details, Design and Template. It also reports whether it is a Send Test.
  • Get a Campaign Browser Report Breaks a campaign down by Browsers, Operating Systems and Platforms, with a total for each group.
  • Get a Campaign Domain Report Splits a campaign by recipient email domain, with a Total and the Campaign Domains. Use Limit to take between 1 and 100 rows.
  • Get a Campaign Report Gives the overview of one campaign: Opens, Clicks, View Rate, Click Rate and Conversions. Set Changed From and Changed To to move off the default of the last three months.
  • Get a Contact Fetches one contact by Contact ID and returns the Email, SMS, First Name, Last Name and State.
  • Get a Contact by External ID Finds the contact filed under your own External ID and External Name, with the Email State Date and SMS State Date.
  • Get a Group Looks up one group by its ID. The result shows its Name, Counter, Active Counter and when it was Last Generated.
  • Get a Group Event Count Counts how often a group produced one Event Type, such as a click or a bounce. Limit it by contact creation date with Created From and Created To, or by event date with Event From and Event To.
  • Get a Lead Retrieves a sales lead by the Lead ID you gave it, returning the Lead Name, Net Amount, Tax and customer details.
  • Get a Mailing List Pulls one mailing list and shows its ID and Name.
  • Get a Push Report Reports one Push Campaign: Sent, Delivered, Opened, Unsubscribes and Click Rate. Set Automation ID to 0 when the campaign did not come from an automation.
  • Get a Push Report Summary Totals sends, clicks and opens for your push campaigns: Totalsent, Totalclicks and Opens. Use Search Text to include only campaigns whose name contains it.
  • Get a Template Fetches an email template with its Subject, Preheader and Content, plus the Template Category Name.
  • Get a WhatsApp Template Reads one approved WhatsApp template and returns its ID, Name and Content.
  • Get an Automation Fetches one automation with its Details, Design and Activation, plus the Triggered Count and Trigger Type ID.
  • Get an Automation Email Summary Sums up email performance of an automation as Unique Views, Conversions, Not Open and Bounced. Narrow the dates with From and To, and turn on Include Bots to count bot activity.
  • Get an Automation Overview Report Counts what an automation sent and who responded: Emails Sent, Emails Opened, Emails Clicked, SMS Sent, plus how many Started and Ended.
  • Get an Automation SMS Summary Totals the texts of an automation: Total Sent, Total Delivered, Total Failed, Total Credits and Total Clicks, between From and To.
  • Get an Operational SMS Reads an operational text message by its Operational SMS ID, which ActiveTrail shows only in its app. Output includes the Name, From Name and Content.
  • Get an Opportunity Fetches a sales opportunity by the Opportunity ID you gave it, with its Opportunity Name, Net Amount and Tax.
  • Get an Order Retrieves a store order through the Order ID you assigned, with its Order Name, Net Amount and Tax.
  • Get an SMS Campaign Fetches one text-message campaign with its Status Name, Total Sent and Unsubscribe Text.

Anthropic's Claude modules

  • Add a Federation Rule Workspace Enables a federation rule for one more workspace. You get back the Workspace name the rule now covers (admin only).
  • Add a Workspace to a Service Account Gives a service account access to a workspace with the Workspace Role you assign. The response says whether the membership is Implicit (admin only).
  • Archive a Credential Marks a credential kept in a vault as archived and gives you the Archived at time.
  • Archive a Deployment Archives a deployment. List Deployments leaves archived ones out unless Include Archived is on.
  • Archive a Federation Issuer Puts a federation issuer into the archive. The output lists who did it under Archived by actor ID (admin only).
  • Archive a Federation Rule Archives a federation rule. The response lists the Attributes the rule used and when it was archived (admin only).
  • Archive a Memory Store Marks a memory store as archived. Output includes the Archived at time.
  • Archive a Service Account Moves a service account to the archive and returns its Organization role (admin only).
  • Archive a Session Archives an agent session and returns its Status and Outcome evaluations.
  • Archive a Tunnel Sets a tunnel aside as archived and reports the Domain it was serving (admin only).
  • Archive a Tunnel Certificate Archives one certificate on a tunnel. The Fingerprint in the response confirms which one was archived (admin only).
  • Archive a Vault Archives a vault that holds credentials. The response lists its Display name.
  • Archive a Workspace Archives an organization workspace and reports its Data residency along with the Archived at time (admin only).
  • Archive an Agent Sets an agent aside as archived. Lists leave archived agents out until Include Archived is turned on.
  • Archive an Environment Moves an environment definition to the archive and reports its Config.
  • Create a Credential Saves a credential into a vault from your Authentication details. Add a Display Name to recognize it later.
  • Create a Deployment Sets up a deployment that runs an Agent inside an Environment ID. Use Schedule to set when it runs, Initial Events to open each session with user messages and Vault IDs to give the agent stored credentials.
  • Create a Federation Issuer Adds a token issuer you trust, identified by its Issuer URL. Turn on Check JTI to reject replayed tokens, and use Max JWT Lifetime Seconds to cap assertion age (admin only).
  • Create a Federation Rule Builds a rule that trades tokens from an Issuer ID for access with an OAuth Scope. Turn on Applies To All Workspaces or name one Workspace ID, and use Token Lifetime Seconds to set how long minted access tokens last (admin only).
  • Create a Memory Writes a new memory into a store from Content, up to 100 kB of UTF-8 text. Use Path to place it in a hierarchy of paths that starts with a slash.
  • Create a Memory Store Creates a memory store called Name. A Description of up to 1024 characters is shown in the system prompt of agents the store is attached to.
  • Create a Message Sends Messages to a Claude model and returns its reply and Stop reason. Use Max Tokens to stop after a number of tokens, Temperature to set sampling between 0 and 2 and System Prompt to give it instructions.
  • Create a Service Account Adds a service account labelled by Name. Use Description to record its purpose and Organization Role, which defaults to developer, to set its access level (admin only).
  • Create a Service Account Workspace Member Enrolls a service account in a workspace under the Workspace Role of your choice. The output echoes the Service account ID (admin only).
  • Create a Session Creates a session in an Environment ID, optionally running an Agent. Use Resources to mount repositories or files and Vault IDs to hand it stored credentials.
  • Create a Skill Uploads a skill from Files, which must share one top-level directory with a SKILL.md at its root. Add a Display Title to name it.
  • Create a Skill Version Uploads a further version of an existing skill from Files. The new Version number shows in the output.
  • Create a Tunnel Certificate Registers a CA Certificate PEM on a tunnel. It must hold exactly one certificate and no private-key material (admin only).
  • Create a User Profile Adds a user profile under a Name. Use Relationship to say how this entity is related to your platform, External ID for your own identifier and Metadata for key-value data.
  • Create a Vault Creates a vault for holding credentials, using a Display Name of 1 to 255 characters. Use Metadata to attach key-value data.
  • Create a Workspace Adds a workspace to your organization under a Workspace Name. Use Data Residency to set where its data is stored, External Key ID to attach an encryption key configuration and Tags to label it (admin only).
  • Create a Workspace Member Gives a user a Workspace Role within a workspace. The response shows the User ID that was added (admin only).
  • Create an Agent Defines an agent from a Model and a Name. Use System to give it a system prompt and MCP Servers to connect up to 20 MCP servers. Add Skills and Tools to shape what it can do.
  • Create an Enrollment URL Generates an enrollment link for a user profile. The response gives the expiry as Expires at.
  • Create an Environment Adds an environment that defines the container sessions run in. Use Config for its setup and Scope for who can see it.
  • Create an External Key Registers a customer-managed encryption key under a Display Name. Describe how your key provider is reached with Provider Config (admin only).
  • Create an Invite Invites a person by Email into your organization with the Role they should hold. The output reports the invitation Status and its Expires at time (admin only).
  • Delete a Credential Removes one stored credential from the vault that holds it.
  • Delete a File Removes an uploaded file from your Claude account.
  • Delete a Memory Deletes a single memory entry from a memory store.
  • Delete a Memory Store Deletes an entire store of agent memories.
  • Delete a Service Account Workspace Member Removes a service account from one workspace of your organization (admin only).
  • Delete a Session Removes one agent session from your Anthropic workspace.
  • Delete a Skill Removes a skill you published earlier from your workspace.
  • Delete a Skill Version Deletes a specific uploaded revision of a skill.
  • Delete a User Revokes the membership of a person in the organization (admin only).
  • Delete a Vault Deletes a vault that stores credentials for agents.
  • Delete a Workspace Member Removes a user from the membership list of one workspace (admin only).
  • Delete an Environment Takes an environment definition, with its container configuration, out of your workspace.
  • Delete an External Key Deletes a registered customer-managed encryption key from your organization (admin only).

Explore alternative integrations

There are other apps[9] supported by WEXTL that can be paired with ActiveTrail and Anthropic's Claude integrations. Pick any from the list below if the current combination isn't the one you need.

Automate ActiveTrail and Anthropic's Claude on WEXTL®

Claim your 3-day trial to build ActiveTrail with Anthropic's Claude integration and access every WEXTL® feature.

Cancel anytime.

Frequently asked questions

Common questions about connecting ActiveTrail and Anthropic's Claude.

How do I connect ActiveTrail and Anthropic's Claude?

Connect your ActiveTrail and Anthropic's Claude accounts once, pick a trigger in one app and an action in the other, then map the fields so data flows automatically between them.[3]

What can I automate between ActiveTrail and Anthropic's Claude?

Example: when the "Watch Campaigns" trigger in ActiveTrail fires, WEXTL can "Add a Federation Rule Workspace" in Anthropic's Claude. ActiveTrail has 3 triggers (including Watch Campaigns, Watch Events, and Watch SMS Replies). Anthropic's Claude has 141 actions (including Add a Federation Rule Workspace, Add a Workspace to a Service Account, and Archive a Credential). Add filters and transforms between steps when you need them.[1]

Can ActiveTrail trigger actions in Anthropic's Claude, and Anthropic's Claude in ActiveTrail?

Yes. The integration works in both directions. Use the triggers of each app to start a workflow and the actions of the other app to update it.[2]

Do I need to write code to integrate ActiveTrail and Anthropic's Claude?

No. ActiveTrail-to-Anthropic's Claude automations are built visually on the canvas. You can optionally add custom JavaScript with Functions when you need advanced logic.[4]

Does ActiveTrail integrate with Anthropic's Claude in real time?

Yes. Trigger-based automations start the moment ActiveTrail (or Anthropic's Claude) fires a new event. Webhook-backed apps run within seconds, and polling-only apps re-check on a schedule you control.[7]

How long does it take to set up a ActiveTrail + Anthropic's Claude integration?

A first automation typically takes 5–10 minutes: connect the credential of each app once, drop a trigger + action onto the canvas, map the fields, and turn the workflow on.

Do I need a paid plan to connect ActiveTrail with Anthropic's Claude?

You can build your ActiveTrail + Anthropic's Claude automation on a 3-day trial with every feature unlocked. Cancel anytime.[8]

References

List of sources used to gather information about the ActiveTrail and Anthropic's Claude integration.

  1. ActiveTrail and Anthropic's Claude integration source code, module specs and credentials implementation.
  2. Our ActiveTrail and Anthropic's Claude integration documentation, structured input and output parameters, scopes, and authentication methods.
  3. Official vendor API documentation for ActiveTrail and Anthropic's Claude, used to verify field meanings, authentication flows, and anything our own specs don't fully capture.
  4. WEXTL® visual workflow builder, anonymized data from our technical support team.
  5. ActiveTrail integration information
  6. Anthropic's Claude integration information
  7. WEXTL® Scheduling
  8. WEXTL® Pricing and Trial
  9. WEXTL® Apps Library

How we write our apps documentation

Explore how WEXTL® crafted ActiveTrail and Anthropic's Claude integration page documentation. Used sources, the role of AI, and how the team validates the result.

Explore ActiveTrail and Anthropic's Claude, or get started