Connect ActiveTrail integrations
VerifiedEmail, SMS and WhatsApp marketing with automations, connected to WEXTL workflows and AI agents. Link ActiveTrail campaigns and audiences to your CRM, ad and analytics workflows. When Watch Campaigns arrives, continue with Estimate an SMS Campaign or Find Contacts by Email or Phone.
- 3-day trial
- Cancel anytime
- Up to 10 minutes quick set up
- GDPR
- Data Encryption
- 2FA
- Local Data Region
Supported triggers and actions for ActiveTrail integration
Triggers can detect changes in ActiveTrail and run actions that can create, search or modify data inside ActiveTrail automatically[3], exactly how you set them.
- Watch Campaigns Checks on a schedule for campaigns that are created or changed and starts a run for each. The first check looks back one day only. Use Limit to set how many it takes.
- Watch Events Starts the workflow instantly when ActiveTrail sends an event. Each run has the Event, ID, Email, Mobile Number, First Name and Last Name of the contact.
- Watch SMS Replies Polls for contacts replying to a text message and starts a run per reply. Only replies from the last day are checked. Use SMS Campaign to follow one campaign, and Limit for the most replies per run.
- Estimate an SMS Campaign Works out how many messages an unsent text campaign would use, as Estimated Messages. Campaigns that were already sent cannot be estimated.
- Find Contacts by Email or Phone Searches contacts by Email, Mobile Number or both and returns each match with its State, SMS State and Is Opted In values.
- Get a Campaign Fetches a campaign in full, including its Details, Design and Template. It also reports whether it is a Send Test.
- Get a Campaign Browser Report Breaks a campaign down by Browsers, Operating Systems and Platforms, with a total for each group.
- Get a Campaign Domain Report Splits a campaign by recipient email domain, with a Total and the Campaign Domains. Use Limit to take between 1 and 100 rows.
- Get a Campaign Report Gives the overview of one campaign: Opens, Clicks, View Rate, Click Rate and Conversions. Set Changed From and Changed To to move off the default of the last three months.
- Get a Contact Fetches one contact by Contact ID and returns the Email, SMS, First Name, Last Name and State.
- Get a Contact by External ID Finds the contact filed under your own External ID and External Name, with the Email State Date and SMS State Date.
- Get a Group Looks up one group by its ID. The result shows its Name, Counter, Active Counter and when it was Last Generated.
- Get a Group Event Count Counts how often a group produced one Event Type, such as a click or a bounce. Limit it by contact creation date with Created From and Created To, or by event date with Event From and Event To.
- Get a Lead Retrieves a sales lead by the Lead ID you gave it, returning the Lead Name, Net Amount, Tax and customer details.
- Get a Mailing List Pulls one mailing list and shows its ID and Name.
- Get a Push Report Reports one Push Campaign: Sent, Delivered, Opened, Unsubscribes and Click Rate. Set Automation ID to 0 when the campaign did not come from an automation.
- Get a Push Report Summary Totals sends, clicks and opens for your push campaigns: Totalsent, Totalclicks and Opens. Use Search Text to include only campaigns whose name contains it.
- Get a Template Fetches an email template with its Subject, Preheader and Content, plus the Template Category Name.
- Get a WhatsApp Template Reads one approved WhatsApp template and returns its ID, Name and Content.
- Get an Automation Fetches one automation with its Details, Design and Activation, plus the Triggered Count and Trigger Type ID.
- Get an Automation Email Summary Sums up email performance of an automation as Unique Views, Conversions, Not Open and Bounced. Narrow the dates with From and To, and turn on Include Bots to count bot activity.
- Get an Automation Overview Report Counts what an automation sent and who responded: Emails Sent, Emails Opened, Emails Clicked, SMS Sent, plus how many Started and Ended.
- Get an Automation SMS Summary Totals the texts of an automation: Total Sent, Total Delivered, Total Failed, Total Credits and Total Clicks, between From and To.
- Get an Operational SMS Reads an operational text message by its Operational SMS ID, which ActiveTrail shows only in its app. Output includes the Name, From Name and Content.
- Get an Opportunity Fetches a sales opportunity by the Opportunity ID you gave it, with its Opportunity Name, Net Amount and Tax.
- Get an Order Retrieves a store order through the Order ID you assigned, with its Order Name, Net Amount and Tax.
- Get an SMS Campaign Fetches one text-message campaign with its Status Name, Total Sent and Unsubscribe Text.
- Get an SMS Report Gives the overview of one text campaign: Sent, Delivered, Errors, Unsubscribed, Sum Clicks and Click Rate.
- Get an SMS Report Summary Adds up text results across campaigns last updated in a range: Total Sent, Total Failed, Total Credits and Total Clicks. Use Campaign Type to restrict it to regular, test or transactional sends.
- Get Automation Email Statistics Reports results for each email in an automation, inside a From and To date range that defaults to the last three months. Turn on Include Bots to count bot opens and clicks, and Include Preview Content to add each email body.
- Get Automation SMS Statistics Reports results for each text message sent by an automation, with a Total Items count. Pick dates with From and To, and turn on Include Bots to count bot clicks.
- Get Contact Campaign Statistics Shows how one contact reacted to one Campaign: Opens, Clicks, Bounce, Bounce Reason and Spam Complaint. Only campaigns changed in the last two years appear in the list.
- Get Contact Status Totals Counts contacts by subscription status between From Date and To Date, which default to the last three months.
- Get Template Content Fetches one template and gives its Content as a single value.
- Get the Account Balance Reads the credits left on the account for Email, SMS and Coupons.
- Get the Contact Growth Report Reports Active Customers Total and Inactive Customers Total for the contact base. Use From and To to move off the default of the last three months.
- Get the Executive Report Summarises email rates for the whole account over the recent period: Emails, Bounces, Opens, Clicks, Complaints and Unsubscribes.
- List Automation Contacts Ended Shows contacts who finished an automation, with Customer ID, Email, SMS and Date Created UTC. Use Filter to match text, and From and To to change the default of three months.
- List Automation Contacts Started Finds contacts who entered an automation, giving each a Customer ID and Email. Narrow them with a Filter text or by From and To.
- List Automation Trigger Types Collects the triggers that can start an automation, each with its ID, Name and Groupname.
- List Automations Gathers the automations of your account with their Triggered Count and Trigger Type ID. Use Status to see only draft, paused, published or deleted ones.
- List Campaign Activity Pulls the activity of every contact on a Campaign, showing Email Address, Open Date and Total Opens. Dates default to the last three months through Changed From and Changed To.
- List Campaign Bounces Reads the bounces for a Campaign with Total Bounces, Total Bounce Rate and the counts per domain. Use Limit to take 1 to 100 rows.
- List Campaign Bounces by Type Narrows the bounces of a campaign to one Bounce Type, soft (temporary) or hard (permanent), or both when left blank.
- List Campaign Clicks Returns each link clicked within a Campaign, with its Link Name, Link URL, Unique Links and Non Unique Links.
- List Campaign Complaints Names the contacts who marked a Campaign as spam, with their Email. Use Group to keep only people from one group.
- List Campaign Openers Finds the contacts who opened a Campaign. Use Group to keep those in one group, and Changed From and Changed To to set the dates.
- List Campaign Recipients Shows who received a Campaign, by Email. Use Group to restrict the list to one group.
- List Campaign Reports Reports send results for campaigns changed within a range, each with its Campaign Name, Opens, Clicks and Conversions.
- List Campaign Unopened Collects contacts that never opened a Campaign, with their Email. Use Group to see only its members.
- List Campaign Unsubscribes Gathers the contacts who unsubscribed after a Campaign, with Customer Reason, Unsubscribe Date and Email.
- List Campaigns Finds email campaigns by name with Search Text, then narrows them by Send Type, Category or Mailing List. Output includes the Subject, Total Sent and Is Sent.
- List Contact Activity Shows how a contact interacted with each email received, through Opened, Clicked, Total Opened and Total Clicked, with the Last Sent Date.
- List Contact Bounces Gathers the emails to one contact that bounced, with the Bounce Type and Bounce Description.
- List Contact Fields Reads the fields defined for contacts, custom ones included, with each Field Display Name and Field Type. Use Field Type to keep a single kind of field.
- List Contact Groups Finds the groups one contact belongs to, with the Name and Counter of each.
- List Contacts Searches contacts by Status, Search Text or change date, showing Email, SMS and State. A plus sign in an email stops it being found by text.
- List Contacts With SMS Status Searches contacts like the regular contact search, and returns the SMS State and its date apart from the email state.
- List Content Categories Retrieves the categories that organise campaigns, with their Name, Display Order and Is Default.
- List Email Sending Profiles Pulls the sender profiles for emails, each with a Profile Name, From Email and Reply To Email.
- List External Contacts Gathers contacts that already carry an external ID, filtered by Status and by Created From and Created To.
- List Group Members Shows the contacts inside a Group, narrowed by Status or Search Text, with their Email and State.
- List Groups Gathers the contact groups with their Counter and Created date. Use Search Text to find groups by part of their name.
- List Landing Pages Reads the landing pages in ActiveTrail, returning each ID and Name.
- List Link Clickers Finds who followed one link in a Campaign, with the Click Date, Email and SMS. Find the Link ID on the clickers report inside ActiveTrail.
- List Mailing List Members Shows the contacts on a Mailing List, narrowed by Status, with Email, SMS and State.
- List Mailing Lists Shows every mailing list on the account, with its ID and Name for use elsewhere.
- List Merge Conflicts Finds contacts held for merging because an email and a phone number matched different records. Use State to narrow the review to one stage.
- List Operational Classifications Retrieves the classifications that group operational emails, each returned as a Classification Key.
- List Push Campaigns Retrieves push notification campaigns by Search Text or sent dates. Turn on Include Deleted or Include Not Sent to widen the list.
- List Push Reports Reads push results over a date range, with Totalsent, Totalclicks, Clickers and Failed Percentage for each campaign.
- List Segmentations Reads the segments in ActiveTrail, each with its ID and Name.
- List Sent Campaigns Retrieves campaigns that have already gone out, showing the Subject, Total Sent and Last Updated date for each. Use Limit to stop after a given number.
- List Signup Forms Reads the signup forms on your account, returning each ID and Name.
- List SMS Campaigns Shows text-message campaigns, operational ones too, with Status Name and Total Sent. Turn on Include Not Sent to add campaigns that have not gone out yet.
- List SMS Clickers Finds contacts who tapped a link in an SMS Campaign, with their Contact ID, SMS number and Clicks Count. Use Link ID to look at one link only.
- List SMS Clicks Gathers the links clicked in an SMS Campaign, with each URL, Total Clicks, Total Clickers and Click Rate.
- List SMS Delivered Pulls the contacts whose text from an SMS Campaign was delivered, with their SMS number and State.
- List SMS Failed Retrieves the contacts an SMS Campaign could not reach, showing their SMS number and State.
- List SMS Replies Returns replies to text messages, each with its Mobile, Reply and Date. Use Search Text to match reply wording and SMS Campaign to see answers to one campaign.
- List SMS Reports Reports results of text campaigns updated in a range, each with its Send Date, Total Credits and Errors. Use Search Text to find a campaign by name.
- List SMS Sending Profiles Reads the sender profiles for texts, giving each profile Name, From Number and whether it Is Default.
- List SMS Sent Finds contacts an SMS Campaign was sent to, with SMS number and State, limited by Updated From and Updated To.
- List SMS Unsubscribed Collects contacts who opted out through an SMS Campaign, showing their SMS number and State.
- List SMS Unsubscribers Gathers every contact who stopped receiving texts, with Email, SMS, Phone1 and Phone2.
- List Subscribers Shows contacts who subscribed within the Changed From and Changed To dates, along with the Source and Reason for each.
- List Subscription Changes Reads each subscribe and unsubscribe within a date range, with the Action, Contact Email and Source of each.
- List Template Categories Retrieves the categories used to sort templates, with Name and Culture Code.
- List Templates Shows saved email templates with Name, Template URL and an Is System flag for built-in ones.
- List Unmapped Contacts Finds contacts with no external ID mapped yet, filtered by Status and by Created From and Created To.
- List Unsubscribers Pulls contacts who unsubscribed between Changed From and Changed To, together with the recorded Source and Reason.
- List WhatsApp Profiles Returns the WhatsApp sender profiles, each with its Name and Phone Number.
- List WhatsApp Templates Gathers the WhatsApp templates, with ID, Name and Content.
- Activate or Pause an Automation Publishes or pauses an automation. Turn on Active to publish and off to pause, and use Start At to publish later instead of now.
- Add a Contact to a Group Puts a contact into a Group, or updates them when they are already in it. Give an Email, a Mobile Number or both, and set Email Status and SMS Status for the subscription state.
- Add a Contact to a Mailing List Signs a contact up for a Mailing List and adds them to the Groups given for it. Use Email or Mobile Number to say who, and add a First Name and Last Name.
- Add External Contacts to a Group Takes up to 1000 contacts from your own system and puts them in a Group, each found by External ID and External Name. Output includes Success and any Contact Errors.
- Add External Contacts to a Mailing List Moves contacts already stored under your own IDs onto a Mailing List, in batches of up to 1000. Each is found by External ID and External Name, and failures are reported through Contact Errors.
- Create a Campaign Creates an email campaign for chosen Groups with a Sender Profile and a Subject. Choose HTML Content or a Template as the Content Source. Turn on Send At Schedule Time to send at the Schedule Time, or leave it off to save a draft.
- Create a Campaign for Contacts Builds a campaign aimed at individual people instead of groups. Provide Contact IDs, Contact Emails or both, plus a Subject and Sender Profile. Add a Preheader to show short text after the subject line.
- Create a Campaign from a Template Creates a campaign from a saved Template with a Name, Subject and Sender Profile. Use Placeholders to swap text in the template content for your own values.
- Create a Cart Records a shopping cart for a customer identified by External User ID, Email or Mobile Number. Fill Products with a Product ID each, and add a Cart URL to link back. Output includes Success and Errors.
- Create a Contact Saves a contact on the account. Provide an Email, a Mobile Number or both, and use Custom Fields for extra data. Output includes the contact ID and State.
- Create a Content Category Makes a category for organising campaigns. Use Display Order to place it in the category list and Is Default to make it the default one.
- Create a Group Makes a new contact group under a Name. Output includes its ID, Counter and Created date.
- Create a Lead Records a sales lead under your own Lead ID for a customer known by External User ID, with an Expected Purchase Date in UTC. Add Products, Total Amount or Location to describe the deal.
- Create a Mailing List Adds a mailing list to the account under a Name. The list ID is returned.
- Create a Template Saves an email template under a Name, with plain text or HTML as Content. For operational sending, add a Subject, Preheader and Classification.
- Create a Template Category Adds a category for grouping templates under a Name. Output includes the category ID and Culture Code.
- Create an Opportunity Records a sales opportunity under your own Opportunity ID, with an External User ID for the customer and an Expected Purchase Date. Add Quantity, Coupon or Products to describe what they may buy.
- Create an Order Records a store order under your own Order ID. Use Purchase Date for when it was placed, in UTC, and Products to list what was bought.
- Create an SMS Campaign Creates a text-message campaign for chosen Groups, from a Message and an Unsubscribe Text. Turn on Send Now to send right away, which cannot be undone, or set a Send Time and Time Zone to schedule it.
- Delete a Campaign Deletes a campaign. A Deleted confirmation comes with its ID.
- Delete a Contact Deletes a contact. The Deleted flag and ID confirm it.
- Delete a Group Removes a group. Output includes its ID and a Deleted confirmation.
- Delete a Mailing List Removes a mailing list and reports its ID with a Deleted value.
- Delete a Template Removes an email template, then reports its ID and whether it is Deleted.
- Delete an External Contact Removes a contact found through its External ID and External Name. Output includes both of them and a Deleted confirmation.
- Delete Automations Deletes one or more automations in a single call. Output includes the IDs and a Deleted confirmation.
- Import Contacts Loads up to 1000 Contacts into a Group in one call. Each needs an email address, a mobile number or both. Add a Mailing List if your account has them.
- Import External Contacts Brings up to 1000 contacts that have IDs of your own into a Group. Output includes the Success Count and any Contact Errors, such as an existing External ID.
- Make an API Call Sends a free-form request to the ActiveTrail REST API, signed with your saved credential.
- Map a Contact to an External ID Attaches your own External ID and External Name to an existing contact, found by Contact ID. Output includes a Mapped confirmation.
- Remove a Contact from a Group Ends the link between a contact and a Group. Output includes the Group ID, the Contact ID and a Removed confirmation.
- Remove a Contact from a Mailing List Detaches a contact from a Mailing List and reports the Mailing List ID, Contact ID and Removed.
- Remove External Contacts from a Group Pulls up to 1000 contacts, each found by External ID and External Name, out of a Group. Output includes Contact Errors for any that failed.
- Remove External Contacts from a Mailing List Detaches contacts keyed by your own External ID and External Name from a Mailing List. Output includes a Success flag and Contact Errors.
- Send a WhatsApp Campaign Fires a WhatsApp campaign at Groups from a chosen Profile, now or later. Turn on Send Now to send right away, which cannot be undone, or set a Send Time in UTC.
- Send a WhatsApp Operational Message Delivers a WhatsApp message to Mobile Numbers from a Profile. Choose an approved template or free text through Message Source, and leave Send Time blank to send straight away.
- Send an Automation Test Fires trial emails and texts for an automation. Name the receivers through Test Emails and Test Phone Numbers. Output includes Total Email Sent and Total SMS Sent.
- Send an External Operational Email Delivers a transactional email to up to 500 contacts found by External ID. Fill Recipients, a Subject, a Sender Profile and a Classification, and use Placeholders for personal text because merge fields do not work here.
- Send an External Operational SMS Texts contacts found by External ID. To schedule the message, switch off Send Now and set a Send Time. Switch on Add Unsubscribe Link for an opt-out link.
- Send an Operational Email Emails up to 500 addresses. Use From Name to override the sender name of the profile and Format to choose HTML or Text.
- Send an Operational Email to Contacts Emails contacts and fills placeholders from their stored details, for up to 500 Recipients. Use Track Statistics to record opens and clicks.
- Send an Operational SMS Texts a list of Mobile Numbers in international format. Turn off Send Now and set a Send Time to schedule it, or use Unsubscribe Text to word the opt-out link.
- Send or Schedule a Campaign Schedules a draft Campaign for a Send Time that must not be in the past. Turn on Send to send it then, or leave it off to only save the time.
- Unmap a Contact from an External ID Detaches the external ID from the contact stored under an External ID and External Name. Output includes an Unmapped confirmation.
- Update a Campaign Edits a draft campaign: its Name, Subject, Sender Profile, Preheader, Category, Content or Template. Use Test Emails to send a test to chosen addresses.
- Update a Campaign Audience Replaces the Groups a draft Campaign goes to. Skip contacts through Excluded Groups, and limit the volume with Max Recipients and Max Emails Per Hour.
- Update a Contact Revises one existing contact. Set a new Email or Mobile Number, adjust First Name and Last Name, and change the subscription through Email Status and SMS Status.
- Update a Group Gives a Group a new Name, replacing the old one.
- Update a Lead Adjusts the sales lead that has this Lead ID. Edit the Lead Name, Total Amount or Tax. Use External User ID and Expected Purchase Date to change the customer and the buy date, or leave them blank to keep the current values.
- Update a Template Edits an email template: its Name, Content, Category or the operational Subject, Preheader and Classification.
- Update an External Contact Modifies the contact stored under an External ID and External Name. Use Email, Mobile Number, First Name or Last Name for details, and the status fields for the subscription.
- Update an Operational SMS Edits an operational text found by Operational SMS ID. Change the Name, Message, Sender Name (up to 11 English letters) or Sender Profile.
- Update an Opportunity Changes the sales opportunity that has this Opportunity ID. Edit Opportunity Name, Quantity, Coupon or Products, and leave External User ID blank to keep the current one.
- Update an Order Changes an order found by Order ID. Edit Order Name, Purchase Date, Coupon or Products.
- Update an SMS Campaign Edits a message campaign and can send it right then. Use Groups to replace who receives it, and Sender Name for up to 11 English letters. Fields left blank keep their current values.
- Update Automation Details Edits the Name of an automation and its repeat rules. Use Allow Repeat Runs to let a contact go through it again, and Block Parallel Runs to stop one contact starting it twice at once.
- Update Template Content Replaces the content of a template with new Content, either plain text or HTML. Add a Name to rename it at the same time.
How to integrate ActiveTrail in automation workflow?
ActiveTrail in three steps: start with "Watch Campaigns", connect one credential, then add your next step.
STEP 1
Select ActiveTrail in workflow
Add the "Watch Campaigns" trigger from ActiveTrail to the canvas[4].
STEP 2
Connect ActiveTrail
Fill in the ActiveTrail credential once. All 149 ActiveTrail modules use it[3].
STEP 3
Build a workflow
Add "Estimate an SMS Campaign" or "Find Contacts by Email or Phone" after it, then connect any app[5] or the HTTP node.
How ActiveTrail connects and integrates with WEXTL
Save and approve your credentials once. WEXTL® stores authorization information encrypted and reuses the authentication whenever ActiveTrail app is called in workflows. That allows your marketing automations to run without your attention, per defined schedule[7]. See the integration guide[6] for a detailed list of fields that ActiveTrail supports.
Full ActiveTrail API documentationThe following table illustrates what fields ActiveTrail integration require during authorization flow inside our workflow builder[4].
Connect ActiveTrail
API Token*Text
••••••••
| Field | Type | Help |
|---|---|---|
API TokenRequired | password | In ActiveTrail, open Settings, then API apps, and click New. Copy the access token it shows. Optionally limit it to the IP address of your server. |
Connect ActiveTrail to popular apps on WEXTL
Enter a name of the other app you want to sync with ActiveTrail below. Click on selected app to explore integration options with ActiveTrail. If the app you search for is not available in WEXTL yet, you can use HTTP node[10] instead to integrate it directly.
Example automation with ActiveTrail integration
Select Watch Campaigns trigger from ActiveTrail - this will be a starting point in your automation. Whenever event happens in ActiveTrail, workflow will start[7] from Watch Campaigns node.
Search for Create a Campaign for Contacts, connect it as the next step of integration sequence. You can use filters between Watch Campaigns and Create a Campaign for Contacts, so only important data pass from Watch Campaigns to the next step. WEXTL gives you full control over the process of ActiveTrail automation. All parts of workflow are visible on the canvas[4].
ActiveTrail on WEXTL has 150 modules for combining marketing automations. Explore ActiveTrail documentation for more.
- ActiveTrailWatch Campaigns
- CardlyPerforms action
OR
- CardlyTriggers
- ActiveTrailCreate a Campaign for Contacts
Frequently asked questions
Common questions about automating ActiveTrail in your workflows.
What triggers does ActiveTrail support?
ActiveTrail has 3 triggers, including "Watch Campaigns", "Watch Events", and "Watch SMS Replies". Triggers are start points of the workflow, and automations may start from them.
What actions can I run in ActiveTrail?
Integration has 147 actions, including "Estimate an SMS Campaign", "Find Contacts by Email or Phone", and "Get a Campaign", and more. Refer to our ActiveTrail Documentation for detailed inputs and outputs.
Do I need to write code to build automations?
No. The 149 ActiveTrail modules, like "Estimate an SMS Campaign", are forms on the canvas: pick a field, map data from an earlier step. Code is optional[4].
Is the integration secure?
Yes. You fill in the ActiveTrail credential once. WEXTL encrypts it at rest, and only your team can use it.
How does WEXTL integrate with ActiveTrail?
Through the official ActiveTrail API: 149 modules, plus "Make an API Call" for any endpoint they don't cover[3].
Can I use webhooks with ActiveTrail?
Yes. "Watch Events" is instant: ActiveTrail pushes each event, so there is no polling delay.
Why use WEXTL platform for ActiveTrail automation?
WEXTL is an AI-first visual canvas: describe the ActiveTrail flow in plain words and AI wires the nodes[4].
References
List of sources used to gather information about the ActiveTrail integration.
- ActiveTrail integration source code, module specs and credentials implementation.
- Internal ActiveTrail integration documentation, structured input and output parameters, scopes, and authentication methods.
- Official ActiveTrail vendor API documentation, used to verify field meanings, authentication flows, and anything our own specs don't fully capture.
- WEXTL® Visual Workflow Builder, anonymized data from our technical support team.
- WEXTL® Apps Library
- WEXTL® ActiveTrail App Documentation
- WEXTL® Workflow Scheduler
- WEXTL® HTTP node documentation
How we write and maintain ActiveTrail app documentation
Explore how WEXTL® crafted ActiveTrail integration page documentation. Used sources, the role of AI, and how the team validates the result.





















