Connect Bolna integrations
VerifiedVoice AI platform for building agents that make and take phone calls, connected to WEXTL workflows and AI agents. Your workflows can send Bolna results straight into the tools that act on them. Start with Watch Call Updates, then use Get a Batch or Get a Callback URL to turn the output into a next step.
- 3-day trial
- Cancel anytime
- Up to 10 minutes quick set up
- GDPR
- Data Encryption
- 2FA
- Local Data Region
Supported triggers and actions for Bolna integration
Triggers can detect changes in Bolna and run actions that can create, search or modify data inside Bolna automatically[3], exactly how you set them.
- Watch Call Updates Instant trigger that fires when a call changes status. The output holds the call details, including the Status, Total Cost and Termination Reason.
- Watch Workflow Executions Instant trigger that fires when a workflow run finishes. The output includes the Event, Execution ID, Workflow ID and Status.
- Get a Batch Looks up a call batch and reports its Status, Scheduled At time and From Phone Number.
- Get a Callback URL Reads the address of a callback node in a Workflow, with its Slug, Signing Secret and Rate Limit Per Min.
- Get a Campaign Pulls one campaign with its Entry Counts and any Validation Errors.
- Get a Campaign CSV Template Fetches the CSV header row that the contact file for a campaign must use.
- Get a Campaign Report Builds a report for one campaign with the Executions count, the Termination Reasons and a Funnel.
- Get a Compliance Application Shows one compliance application with its Status, the GST Number it was filed with and a Rejection Reason when it was refused.
- Get a Disposition Reads one disposition with its Question, Category, Model and Is Subjective value.
- Get a Knowledge Base Opens one knowledge base and shows its Status, Chunk Size and Similarity Top K.
- Get a SIP Trunk Loads one trunk with its Name and Channels, and shows whether it is open to inbound and outbound calls.
- Get a Workflow Reads a workflow along with its Settings, its Draft and its Published version.
- Get a Workflow Draft Fetches the draft Definition and Revision of a workflow. Keep the Revision to send back when saving the draft.
- Get a Workflow Execution Looks up the run of one contact, with its Status, Current Node ID, Outcome and Call Count. Take the Execution ID from Run a Workflow or Watch Workflow Executions.
- Get a Workflow Version Reads one published version with its Published At time, the Definition and any Warnings.
- Get an Agent Loads one voice agent and returns its Agent Name, Agent Type, Agent Status and Tasks.
- Get an Execution Returns one call with its Conversation Duration, Total Cost, Status and Termination Reason. Take the Execution ID from Make a Call or Watch Call Updates.
- Get an Execution Debug Bundle Collects the Execution, its Progression and the Logs for one call to help trace a problem. Use Include to limit which sections are returned.
- Get Execution Logs Gets the raw pipeline logs from a call, each entry with a Created At time, Type, Component and Provider.
- Get SIP Connection Details Returns the values to enter at your carrier: the SIP Domain, IPs, Port, Transports and RTP Ports.
- Get Sub-Account Usage Totals the usage and cost of one sub-account, such as Total Duration and Total Cost. Use From and To to set the UTC period, which is the current one when blank.
- Get the Account Info Reads your Bolna account, with the Name, Email, Wallet balance and Concurrency limit.
- Get the Last Callback Shows the latest request that a callback node received, with its Received At time, Raw body, Match result and any Warnings.
- Get the Pronunciation Status Returns the Status of the pronunciation dictionary for one voice agent.
- Get Workflow Node Types Lists the Node Types that workflows may be built from, grouped by Namespaces and with their Effects.
- List Agents Shows every voice agent in your account with its Agent Name, Agent Type, Agent Status and Created At date.
- List Batch Executions Gives the calls that belong to one Batch, with each Status, Total Cost and Conversation Duration. Use Limit to cap the rows.
- List Batches Finds all batches of one Agent, showing each Status, Scheduled At time and From Phone Number.
- List Campaign Entries Lists the contacts uploaded to a Campaign, each with a Mobile Number and Status. Use Status to keep one state, and Sort By with Order to sort the rows.
- List Campaign Executions Lists the contact runs of a Campaign with their Current Node ID and Call Count. Add a Status or Outcome to limit the rows.
- List Campaigns Finds your campaigns with their Entries Count, Success Count and Failure Count. Narrow them by Workflow, Status or Kind, where batch campaigns hold uploaded entries.
- List Compliance Applications Returns the phone number compliance applications of your account, each with a Status, Company Name and Rejection Reason.
- List Custom Models Shows the language models you registered, with their Display Name, Provider, Family and Base URL.
- List Custom Voices Shows the voices registered from your own servers, each with a Provider, Voice, Model and Base URL.
- List Dispositions Returns call dispositions with their Question, Category and Model. Use Agent to see only those linked to one agent.
- List Executions Lists the calls of one Agent between From and To, a range of at most 7 days. Add Status, Call Type, Provider or Answered By Voicemail to limit the rows.
- List Extraction Categories Gives the categories of one Agent, showing the Match Mode of each and the Dispositions inside it.
- List Knowledge Bases Shows all knowledge bases with their File Name, Status and Chunk Size.
- List Phone Numbers Shows the numbers on your account with each Phone Number, Agent ID, Price and Renewal At date.
- List Providers Lists the third-party keys saved in your account by Provider Name, with the masked Provider Value.
- List SIP Trunk Calls Reads the calls on one trunk with their Direction, Duration S and SIP Code. Set Direction to Failed for calls that did not connect, or Number for one trunk number.
- List SIP Trunks Returns every SIP trunk as the Trunks list, one entry for each carrier connection.
- List Sub-Accounts Shows each sub-account with its Name, Min Concurrency and Max Concurrency.
- List Usage for All Sub-Accounts Totals usage and cost across every sub-account, such as Total Records and Total Cost. Use From and To to set the UTC period, which is the current one when blank.
- List Violations Shows call violations with their From Phone Number, To Phone Number and Date Of Call. Pass a Status to see violations in one state.
- List Voice Providers Lists voice providers and their Models for a Language, marking each as supported or not through Is Supported.
- List Voices Returns voices of one Provider ID and Model ID, each with a Name, Gender, Accent and Preview URL. Add Language to keep voices for one language.
- List Workflows Shows your workflows with their Status and Latest Published Version. Use Name to find workflows containing some text, ignoring case.
- Search Phone Numbers Finds numbers available to buy in a Country. Use Pattern to match the first 3 characters, and Provider to see one telephony provider with prices in dollars.
- Abort a Campaign Ends a campaign for the rest of its run, and the action cannot be undone. The output returns its Status.
- Add a Carrier IP to a SIP Trunk Opens a SIP trunk to one more carrier address. Only a public IPv4 address or CIDR range no broader than /16 works as the Address Or Range.
- Add a Custom Model Registers a model of your own that speaks the OpenAI API, with its Model Name, Base URL, API Key and Model Family. Bolna stores the key encrypted. Use Languages to list its language codes, otherwise en applies.
- Add a Custom Voice Links a voice from a text-to-speech server you run, using its Voice, Model and Base URL. Fill API Key only when the server wants authentication.
- Add a Gateway to a SIP Trunk Adds a carrier host that outbound calls go to. Set Port when the carrier uses a particular SIP port, and Priority so lower numbers are tried first.
- Add a Number to a SIP Trunk Attaches a phone number from your carrier to a trunk, with Phone Number in E.164 format as the caller ID of outbound calls. Use Called Number Key to match inbound calls and Agent to pick who answers them.
- Add a Provider Saves a third-party key under a Provider Name such as OPENAI_API_KEY. Bolna masks the Provider Value once it is saved.
- Buy a Phone Number Buys a number that is billed every month, found beforehand with Search Phone Numbers. Turn on I Understand This Is Billed Monthly to confirm, and add a Compliance Application where required.
- Cancel a Call Cancels a call by its Execution ID, which comes from Make a Call. Only a queued or scheduled call can be cancelled.
- Cancel a Workflow Execution Stops the workflow run of one contact. Use Reason to attach a free-form note to the cancellation.
- Cancel Queued Calls for an Agent Cancels all calls of an agent that are still queued, and the output reports the Stopped Executions.
- Create a Batch Uploads a CSV File of contacts as a batch for an Agent to call. Turn on Retry Failed Calls and set Max Retries from 1 to 3 to retry misses.
- Create a Campaign Builds a campaign around a Workflow with a published version, under a Name. Leave Start Time blank to begin it manually, and use Version to pin a particular published version.
- Create a Compliance Application Files compliance paperwork for India phone numbers, with the applicant First Name and Last Name, the Company Name and the GST Number. Match the GST Number to the uploaded certificate exactly, and send the CIN Certificate as a PDF up to 10 MB.
- Create a Disposition Defines a Question that the model answers from each call transcript, linked to an Agent and shown under a Name. Switch on Pick From Options so the model chooses among the Options.
- Create a Knowledge Base Builds a knowledge base from either a PDF File up to 20 MB or a web page URL. Use Chunk Size and Similarity Top K to tune how text is split and retrieved.
- Create a SIP Trunk Sets up a SIP trunk for your own phone carrier, named by Name. Use Channels to cap simultaneous calls and Gateways to list the hosts outbound calls go to.
- Create a Sub-Account Creates a sub-account with a Name and a Minimum Concurrency of calls reserved at once. Leave Maximum Concurrency blank for an elastic account, or turn on Separate Database to keep its data apart.
- Create a Workflow Creates an empty workflow with the display Name given. The output includes its Status and Latest Published Version.
- Create an Agent Creates a voice agent from an Agent Name, Welcome Message and System Prompt, along with its language model, voice and transcriber choices. Use Max Tokens to cap the length of each reply.
- Create an Extraction Category Groups dispositions under a Name that is unique among the categories of one Agent. Choose a Model to evaluate them in a single pass, and turn on Skip Voicemail to leave out voicemail calls.
- Create Several Dispositions Adds several dispositions at once for one Agent. Fill the Dispositions list with a Name and a Question for each entry.
- Delete a Batch Removes a call batch from the Bolna account.
- Delete a Campaign Deletes a campaign, which works only while it is still a draft.
- Delete a Compliance Application Removes a submitted compliance application from your account.
- Delete a Custom Model Deletes a custom language model registered in your account.
- Delete a Custom Voice Removes a custom voice that you registered earlier.
- Delete a Disposition Deletes a call disposition from your account.
- Delete a Knowledge Base Deletes a knowledge base from the Bolna account.
- Delete a Phone Number Removes a phone number from your account and ends the monthly billing for it.
- Delete a SIP Trunk Deletes a SIP trunk that was set up for your carrier.
- Delete a Sub-Account Deletes one sub-account of your Bolna organisation.
- Delete a Workflow Deletes a workflow from the workflow list in Bolna.
- Delete an Agent Removes a voice agent from your Bolna account.
- Delete an Extraction Category Removes an extraction category from an agent.
- Make a Call Places an outbound call from an Agent to a Recipient Phone Number in E.164 format. Use Schedule to queue it for a later time, and Call Variables to fill the variables of the agent prompt.
- Make an API Call Makes an authorized free-form request to the Bolna REST API with your saved credential.
- Move a Phone Number Hands a Phone Number over from the main account to a sub-account, or back. Use From Sub-Account and To Sub-Account for the two ends, where blank means the main account.
- Pause a Campaign Pauses a campaign that is running, and the output returns its new Status.
- Publish a Workflow Publishes the current draft of a workflow as a new version. The output shows the Version, Published At time and any Warnings.
- Remove a Carrier IP from a SIP Trunk Removes one carrier address that a SIP trunk accepts calls from.
- Remove a Gateway from a SIP Trunk Removes a carrier host from the gateways of a SIP trunk.
- Remove a Number from a SIP Trunk Removes a phone number that was attached to a trunk.
- Remove a Provider Deletes a saved provider key from your account.
- Remove an Inbound Agent Unlinks a Phone Number from the agent that answers it, ending inbound answering on that number.
- Resend a Workflow Webhook Sends the webhook of a finished workflow run once more. Only an execution that has finished can be resent, and the output reports whether it was Accepted.
- Resume a Campaign Restarts a campaign that was paused, and the output returns its Status.
- Rotate a Callback URL Replaces the address and secret of a callback node in a Workflow with new ones, returning the URL, Slug and Signing Secret.
- Run a Workflow Starts one contact through a published Workflow. Use Reference ID to identify the contact, and a repeated one is rejected as a duplicate. Give the Mobile Number when the start node asks for it.
- Schedule a Batch Schedules a batch to begin dialling at a Start Time at least 2 minutes ahead. Turn on Bypass Calling Hours to skip the calling hours of the agent for every call.
- Send a Test Webhook Posts a sample result to the result webhook of a workflow, reporting the Webhook URL, Sample Path and Sample Outcome.
- Set an Agent for a Trunk Number Assigns the Agent that answers calls to a trunk number. Leave Agent blank to clear the assignment.
- Set an Inbound Agent Assigns an Agent to answer calls to a Phone Number. On Plivo numbers you can set Allow Multiple to link more than one agent and IVR Enabled to turn on the phone menu.
- Start a Campaign Starts a campaign, and its contacts are dialled right away. The output returns the Status.
- Stop a Batch Stops a batch that is running, and the output reports its State.
- Test Dispositions Runs the dispositions of an Agent against a sample Transcript and returns the Extracted Data. Add a Call Date for questions about time.
- Update a Disposition Modifies a disposition, with a new Name, Question or Category. Fill Agent to change it for that agent only, as a private copy.
- Update a SIP Trunk Alters a SIP trunk. Set Active to No to stop all its inbound and outbound calls, use Channels to cap simultaneous calls and Codecs to order the preferred codecs.
- Update a Sub-Account Edits a sub-account by Name, Minimum Concurrency or Maximum Concurrency. Use Clear Fields with Maximum Concurrency to remove the cap and make the account elastic.
- Update a Workflow Renames a workflow with Name or sets its result Webhook URL. The URL must be https on port 443 or 8443 and replaces the current one.
- Update a Workflow Draft Saves the draft Definition of a workflow as a JSON graph. Send the Revision that you last read, because an earlier one is rejected.
- Update an Agent Changes the Agent Name, Welcome Message, System Prompt, voice or calling hours of an agent. A new Webhook URL replaces the current one. Use Clear Fields to remove the webhook.
- Update an Extraction Category Adjusts an extraction category with a new Name or Model. Use Minimum Duration (Seconds) to skip short calls, and Match Mode with Match Values for follow-ups.
- Update the Agent Configuration Rewrites the full configuration of an agent, including the language model and transcriber. Type the Welcome Message again, since Bolna cannot return the current one, and note that a blank Webhook URL removes it.
- Upload Campaign Entries Adds up to 1000 Contacts to a Campaign in one upload. The output reports how many were Accepted, Corrected or Failed.
- Upload Campaign Entries from a CSV File Loads contacts into a Campaign from a CSV File with a header row, or from CSV Text, but not both. The output counts the rows Accepted, Corrected and Failed.
- Upload Violation Evidence Submits an Evidence File, such as an image or document, for a Violation that still needs it. Only pending violations can receive evidence.
- Validate a Workflow Checks the saved draft of a workflow for problems and lists them as Issues.
How to integrate Bolna in automation workflow?
Bolna in three steps: start with "Watch Call Updates", connect one credential, then add your next step.
How Bolna connects and integrates with WEXTL
Save and approve your credentials once. WEXTL® stores authorization information encrypted and reuses the authentication whenever Bolna app is called in workflows. That allows your ai automations to run without your attention, per defined schedule[7]. See the integration guide[6] for a detailed list of fields that Bolna supports.
Full Bolna API documentationThe following table illustrates what fields Bolna integration require during authorization flow inside our workflow builder[4].
Connect Bolna
API Key*Text
••••••••
| Field | Type | Help |
|---|---|---|
API KeyRequired | password | In the dashboard open Developers, then API Keys, and generate a key. The key is shown only once, so copy it now. A sub-account key works too and limits the connection to that sub-account. |
Connect Bolna to popular apps on WEXTL
Enter a name of the other app you want to sync with Bolna below. Click on selected app to explore integration options with Bolna. If the app you search for is not available in WEXTL yet, you can use HTTP node[10] instead to integrate it directly.
Example automation with Bolna integration
Select Watch Workflow Executions trigger from Bolna - this will be a starting point in your automation. Whenever event happens in Bolna, workflow will start[7] from Watch Workflow Executions node.
Search for Create a Workflow, connect it as the next step of integration sequence. You can use filters between Watch Workflow Executions and Create a Workflow, so only important data pass from Watch Workflow Executions to the next step. WEXTL gives you full control over the process of Bolna automation. All parts of workflow are visible on the canvas[4].
Bolna on WEXTL has 117 modules for combining ai automations. Explore Bolna documentation for more.
- BolnaWatch Workflow Executions
- Lindo AIPerforms action
OR
- Lindo AITriggers
- BolnaCreate a Workflow
Frequently asked questions
Common questions about automating Bolna in your workflows.
What triggers does Bolna support?
Bolna has 2 triggers, including "Watch Call Updates" and "Watch Workflow Executions". Triggers are start points of the workflow, and automations may start from them.
What actions can I run in Bolna?
Integration has 115 actions, including "Get a Batch", "Get a Callback URL", and "Get a Campaign", and more. Refer to our Bolna Documentation for detailed inputs and outputs.
Do I need to write code to build automations?
No. The 116 Bolna modules, like "Get a Batch", are forms on the canvas: pick a field, map data from an earlier step. Code is optional[4].
Is the integration secure?
Yes. You fill in the Bolna credential once. WEXTL encrypts it at rest, and only your team can use it.
How does WEXTL integrate with Bolna?
Through the official Bolna API: 116 modules, plus "Make an API Call" for any endpoint they don't cover[3].
Can I use webhooks with Bolna?
Yes. "Watch Call Updates" and "Watch Workflow Executions" are instant: Bolna pushes each event, so there is no polling delay.
Why use WEXTL platform for Bolna automation?
WEXTL is an AI-first visual canvas: describe the Bolna flow in plain words and AI wires the nodes[4].
References
List of sources used to gather information about the Bolna integration.
- Bolna integration source code, module specs and credentials implementation.
- Internal Bolna integration documentation, structured input and output parameters, scopes, and authentication methods.
- Official Bolna vendor API documentation, used to verify field meanings, authentication flows, and anything our own specs don't fully capture.
- WEXTL® Visual Workflow Builder, anonymized data from our technical support team.
- WEXTL® Apps Library
- WEXTL® Bolna App Documentation
- WEXTL® Workflow Scheduler
- WEXTL® HTTP node documentation
How we write and maintain Bolna app documentation
Explore how WEXTL® crafted Bolna integration page documentation. Used sources, the role of AI, and how the team validates the result.





















