Connect DialMyCalls integrations
VerifiedVoice call and text message broadcasts, contacts, recordings and numbers, connected to WEXTL workflows and AI agents. Your workflows can post to DialMyCalls and react to what happens there. Start from Watch Incoming Texts, then follow with Get a Call Broadcast or Get a Caller ID.
- 3-day trial
- Cancel anytime
- Up to 10 minutes quick set up
- GDPR
- Data Encryption
- 2FA
- Local Data Region
Supported triggers and actions for DialMyCalls integration
Triggers can detect changes in DialMyCalls and run actions that can create, search or modify data inside DialMyCalls automatically[3], exactly how you set them.
- Watch Incoming Texts Notices texts received after the last poll and fires per text, with From Number and Message.
- Watch New Call Broadcasts Polls for call broadcasts made after the previous check and returns each with its Name, Recording ID and Credit Cost. Set Limit to choose how many recent broadcasts are checked each time.
- Watch New Contacts Looks for contacts added after the previous poll and runs the workflow once per contact, with Firstname and Phone.
- Watch New Text Broadcasts Catches text broadcasts created after the last poll and fires per broadcast, with Name and Total Recipients.
- Get a Call Broadcast Opens a call broadcast showing its Name, Recording ID, Pending Cancel state and Credit Cost.
- Get a Caller ID Looks up a caller ID: its Name, its Phone and whether it is Approved.
- Get a Contact Fetches a single contact: Firstname, Lastname, Phone and Extension.
- Get a Group Loads a contact group with its Name and Contacts Count.
- Get a Keyword Retrieves a text keyword and shows its Keyword text along with its Status.
- Get a Recording Pulls a recording and shows its Name, Type, Seconds and URL, and whether it was Processed.
- Get a Text Broadcast Reads a text broadcast and its Name, Pending Cancel state, Credit Cost and Total Recipients.
- Get a Vanity Number Shows a vanity number with its Phone, Status, Minutes Used, Minutes Allowed and Voicemails New.
- Get a Vanity Voicemail Fetches a voicemail left on a vanity number, with its From Phone, URL and Duration.
- Get an Access Account Reads an access account with its Name, Email, Created At and Updated At.
- Get an Incoming Text Reads a received text with its From Number, To Number and Message.
- Get Your Account Shows the Credits Available on your DialMyCalls account and when it was Created At.
- List Access Accounts Shows the sub-logins on your DialMyCalls account with their Name, Email and Created At.
- List Call Broadcasts Returns voice broadcasts with their Name, Recording ID, Pending Cancel state and Credit Cost.
- List Call Recipients Browses the people in one call broadcast, with Email, Phone and Firstname.
- List Caller IDs Returns the caller IDs you saved with their Name and Phone, and whether each is Approved.
- List Contacts Fetches your contacts, including Miscellaneous notes with each Phone number.
- List Contacts in a Group Pulls the contacts that belong to one group, showing Firstname, Lastname and Phone.
- List Do Not Contacts Finds the numbers on your do-not-contact list with their Phone and Type.
- List Groups Gets contact groups with their Name and Contacts Count.
- List Incoming Texts Reads texts received on your numbers, with From Number, To Number and Message.
- List Keywords Looks up the text keywords registered on your account with their Keyword text and Status.
- List Recordings Returns your voice recordings with Name, Type, Seconds and URL.
- List Shortcodes Shows the shortcodes available when you send a text broadcast.
- List Text Broadcasts Retrieves text broadcasts with Name, Credit Cost and Total Recipients.
- List Text Recipients Pulls the people in one text broadcast, each with Firstname, Lastname and Phone, plus the delivery Status and whether it was Successful.
- List Vanity Numbers Lists your vanity numbers with Phone, Status, Minutes Used and Minutes Allowed.
- List Vanity Voicemails Lists voicemails left on one vanity number, each with its From Phone, URL and Duration.
- Add a Caller ID Registers a phone number as a caller ID under a Name you can recognize. The new entry shows whether it is Approved.
- Add a Contact Saves a contact by Phone number. Use Groups to place it in groups and Extra to keep miscellaneous data about the contact.
- Add a Group Creates a contact group under a Name, ready to receive contacts. The result includes the Contacts Count.
- Add an Access Account Creates a sub-login for your DialMyCalls account from an Email and Name. Give the Password at least 8 characters with 1 digit and 1 uppercase letter.
- Cancel a Call Broadcast Cancels a voice broadcast that has not finished, returning its ID.
- Cancel a Text Broadcast Stops a text send that is still running and returns its ID.
- Create a Call Broadcast Sends a recorded voice call to Contacts from a Caller ID, playing a Recording. Schedule it with Send At or choose Send Immediately, which is billed. Add an Answering Machine Recording and enable Use Answering Machine Detection to play it when a machine picks up.
- Create a Recording by Phone Calls a Phone number so that person can record a message by voice. Use Caller ID to set the number the call comes from, and turn on Remove DialMyCalls Intro to drop the intro message.
- Create a Recording from a URL Imports an MP3 or WAV file from a public link as a new recording, labeled with Name.
- Create a Recording from Text Turns Text into speech with a Male or Female Voice and a choice of Language, then stores it as a recording with its Seconds and URL.
- Create a Text Broadcast Sends text Messages to Contacts, linked to a Keyword. Schedule it with Send At or turn on Send Immediately, which is billed. Turn on Combine Messages to merge several messages into one.
- Delete a Caller ID Removes a saved caller ID number and returns its ID.
- Delete a Contact Deletes a contact from your list and returns its ID.
- Delete a Group Removes a contact group, returning its ID.
- Delete a Keyword Removes a text keyword from your account and returns its ID.
- Delete a Recording Deletes a voice recording and returns its ID.
- Delete a Vanity Number Removes a vanity number from your account and returns its ID.
- Delete a Vanity Voicemail Deletes one voicemail that a caller left on a vanity number.
- Delete an Access Account Deletes an access account and returns its ID.
- Delete an Incoming Text Deletes a text message that someone sent to you and returns its ID.
- Make an API Call Makes an authorized free-form request to the DialMyCalls REST API with your saved credential.
- Start a Caller ID Verification Begins verifying a caller ID from its Phone and Name, which starts the call that reads out a PIN.
- Update a Caller ID Gives a caller ID a new Name while keeping the phone number it belongs to.
- Update a Contact Rewrites the details of a contact, from Phone to Extra. Pass Groups to replace the stored groups, and Clear Fields to empty First Name, Last Name, Extension or Email.
- Update a Group Renames a contact group under a new Name.
- Update a Recording Renames a voice recording under a new Name.
- Update a Vanity Number Reconfigures how callers are answered. DialMyCalls does not return these settings, so send the Recording Source and the call options each time, because options you leave off are turned off.
- Update an Access Account Replaces the stored Email, Password or Name of an access account with new values.
- Verify a Caller ID Completes the verification of a caller ID with the PIN read out in the verification call.
How to integrate DialMyCalls in automation workflow?
DialMyCalls in three steps: start with "Watch Incoming Texts", connect one credential, then add your next step.
STEP 1
Select DialMyCalls in workflow
Add the "Watch Incoming Texts" trigger from DialMyCalls to the canvas[4].
STEP 2
Connect DialMyCalls
Fill in the DialMyCalls credential once. All 60 DialMyCalls modules use it[3].
STEP 3
Build a workflow
Add "Get a Call Broadcast" or "Get a Caller ID" after it, then connect any app[5] or the HTTP node.
How DialMyCalls connects and integrates with WEXTL
Save and approve your credentials once. WEXTL® stores authorization information encrypted and reuses the authentication whenever DialMyCalls app is called in workflows. That allows your communication automations to run without your attention, per defined schedule[7]. See the integration guide[6] for a detailed list of fields that DialMyCalls supports.
Full DialMyCalls API documentationThe following table illustrates what fields DialMyCalls integration require during authorization flow inside our workflow builder[4].
Connect DialMyCalls
API Key*Text
••••••••
| Field | Type | Help |
|---|---|---|
API KeyRequired | password | In DialMyCalls open the API Info page of your account and copy your API key. |
Connect DialMyCalls to popular apps on WEXTL
Enter a name of the other app you want to sync with DialMyCalls below. Click on selected app to explore integration options with DialMyCalls. If the app you search for is not available in WEXTL yet, you can use HTTP node[10] instead to integrate it directly.
Example automation with DialMyCalls integration
Select Watch New Text Broadcasts trigger from DialMyCalls - this will be a starting point in your automation. Whenever event happens in DialMyCalls, workflow will start[7] from Watch New Text Broadcasts node.
Search for Create a Call Broadcast, connect it as the next step of integration sequence. You can use filters between Watch New Text Broadcasts and Create a Call Broadcast, so only important data pass from Watch New Text Broadcasts to the next step. WEXTL gives you full control over the process of DialMyCalls automation. All parts of workflow are visible on the canvas[4].
DialMyCalls on WEXTL has 61 modules for combining communication automations. Explore DialMyCalls documentation for more.
- DialMyCallsWatch New Text Broadcasts
- ClickSendPerforms action
OR
- ClickSendTriggers
- DialMyCallsCreate a Call Broadcast
Frequently asked questions
Common questions about automating DialMyCalls in your workflows.
What triggers does DialMyCalls support?
DialMyCalls has 4 triggers, including "Watch Incoming Texts", "Watch New Call Broadcasts", and "Watch New Contacts", and more. Triggers are start points of the workflow, and automations may start from them.
What actions can I run in DialMyCalls?
Integration has 57 actions, including "Get a Call Broadcast", "Get a Caller ID", and "Get a Contact", and more. Refer to our DialMyCalls Documentation for detailed inputs and outputs.
Do I need to write code to build automations?
No. The 60 DialMyCalls modules, like "Get a Call Broadcast", are forms on the canvas: pick a field, map data from an earlier step. Code is optional[4].
Is the integration secure?
Yes. You fill in the DialMyCalls credential once. WEXTL encrypts it at rest, and only your team can use it.
How does WEXTL integrate with DialMyCalls?
Through the official DialMyCalls API: 60 modules, plus "Make an API Call" for any endpoint they don't cover[3].
Can I use webhooks with DialMyCalls?
DialMyCalls doesn't push events here, so 4 triggers, like "Watch Incoming Texts" and "Watch New Call Broadcasts", check on the schedule you set. Anything DialMyCalls posts to a URL can start a Custom Webhook node.
Why use WEXTL platform for DialMyCalls automation?
WEXTL is an AI-first visual canvas: describe the DialMyCalls flow in plain words and AI wires the nodes[4].
References
List of sources used to gather information about the DialMyCalls integration.
- DialMyCalls integration source code, module specs and credentials implementation.
- Internal DialMyCalls integration documentation, structured input and output parameters, scopes, and authentication methods.
- Official DialMyCalls vendor API documentation, used to verify field meanings, authentication flows, and anything our own specs don't fully capture.
- WEXTL® Visual Workflow Builder, anonymized data from our technical support team.
- WEXTL® Apps Library
- WEXTL® DialMyCalls App Documentation
- WEXTL® Workflow Scheduler
- WEXTL® HTTP node documentation
How we write and maintain DialMyCalls app documentation
Explore how WEXTL® crafted DialMyCalls integration page documentation. Used sources, the role of AI, and how the team validates the result.





















