Connect ReachInbox integrations
VerifiedCold email outreach with sending accounts, warmup, campaigns and a shared inbox, connected to WEXTL workflows and AI agents. Turn ReachInbox engagement into workflows that keep leads and audiences moving. Start with Watch Events (Instant), then use Check a Tracking Domain and Count Unread Conversations for the next step.
- 3-day trial
- Cancel anytime
- Up to 10 minutes quick set up
- GDPR
- Data Encryption
- 2FA
- Local Data Region
Supported triggers and actions for ReachInbox integration
Triggers can detect changes in ReachInbox and run actions that can create, search or modify data inside ReachInbox automatically[3], exactly how you set them.
- Watch Events (Instant) Starts the workflow the moment ReachInbox fires a webhook event. Each event brings its Event name, Data and Campaign ID.
- Check a Tracking Domain Tests whether a custom tracking domain is set up correctly in ReachInbox. A failure usually means the CNAME record is not in place yet.
- Count Unread Conversations Counts unread conversations in the unified inbox. Narrow the count by Campaigns, Sending Accounts, Interest Status or Folder, where Inbox is the default.
- Download an Attachment Downloads a file attached to a message in a sending account. Use File Name to set what the file is called and Message ID to say which message holds it.
- Find Leads in a Campaign Finds leads in a campaign by Email Contains, Lead Behavior, Lead Status or Sending Status. Use Subsequence ID to look inside one subsequence.
- Get a Campaign Reads one campaign with its Status, Daily Limit and Mails Sent Today, plus whether it Is Active or Has Started.
- Get a Campaign Name Gets only the Name of a campaign, without its settings and counters.
- Get a Campaign Status Checks the Status of a campaign together with the flags Is Active, Has Started and Is Archived.
- Get a Conversation Reads the messages of one inbox conversation with their Subject and Body. Turn on Preview Only to preview the thread without opening it.
- Get a Deliverability Test Reads one inbox placement test with its Status, Inbox Count, Spam Count and Inbox Percent.
- Get a Lead Looks up one lead in a campaign, using Lead ID or Email, and returns its Status, Step Number and Next Email Time.
- Get a Lead List Reads a lead list, returning its Name and Core Variables.
- Get a Sending Account Reads a mailbox with its Campaign Stats, Email Details and Domain Records. Use Account ID when you have it, or Account to look it up by address.
- Get Account Details Reads the Email and Name of the user that owns your ReachInbox API key.
- Get Account Health Scores Returns the daily Health Score of a mailbox between Start Date and End Date, one row per Date.
- Get an OAuth Link for an Email Account Creates a sign-in link for a Provider so a person can authorize a mailbox themselves. Use Redirect To to send them back to your own page afterwards.
- Get Campaign Analytics Summarizes outreach between a Start Date and End Date, with Open Rate, Click Rate, Reply Rate and Positive Replies. Use Leave Out Campaigns to exclude some.
- Get Deliverability Test Results Fetches the detailed results of a placement test. Use View to group them, such as by provider.
- Get Lead Status Counts Counts the leads of a campaign by stage, from Not Contacted through Contacted to Completed, Paused and Blocked. Use Start Date and End Date to count only leads added in a window.
- Get Warmup Analytics Totals warmup traffic across mailboxes, counting messages that landed in the inbox, in spam or were saved. Use Sending Account to limit it to one mailbox.
- Get Warmup Statistics Shows warmup volumes per mailbox, with how many messages each one sent and received. Use Limit to cap the rows.
- List Blocklist Entries Pages through the entries of one blocklist, each with its Email and Created At. Use Contains to search the text and Order to sort.
- List Campaigns Retrieves campaigns along with Sent, Total Opens and Total Replies. Use State, Tags, Archived Only or Sort to filter and order them.
- List Deliverability Tests Finds inbox placement tests with their Status, Test Type and Inbox Percent. Use Created From and Created To to bound the dates, and Sort Field to order them.
- List Inbox Conversations Searches the unified inbox and returns conversations with their Subject and Body. Filter by Search, Interest Status, Folder or Campaigns.
- List Lead Lists Finds lead lists with their Global Leads Count and update times. Use Contains with an at sign to find the lists a lead belongs to, or with text to match names.
- List Leads on a Lead List Reads the leads stored in one lead list, each with its Email and Attributes. Use Verification Result to keep only leads with a given result and Email Contains to match part of an address.
- List Sending Accounts Lists the mailboxes connected to ReachInbox with their Type, Status Connection and Mails Sent Today. Filter with Contains, Status or Tags.
- List Tags Gets the tags on your account, each with its Tag Name, Tag Color and Tag ID.
- List the Sending Accounts of a Campaign Shows which mailboxes are attached to one campaign and send for it.
- List Webhook Events Shows the event types a ReachInbox webhook can fire on, with an ID and Value for each. Watch Events (Instant) receives them.
- List Webhook Notifications Lists webhook subscriptions with their Event, Callback Host, Campaign and Integration Type, plus an Is Active flag.
- Search the Inbox Searches the unified inbox for the Search phrase. Use Folder to look in one folder, and Sending Accounts or Leave Out Accounts to change which mailboxes are included.
- Add Leads to a Campaign Adds leads to a campaign. Every lead needs an email, and each custom field becomes a field you can use inside the emails.
- Add Leads to a Lead List Adds leads to a lead list. Turn on Verify Emails to check each address as it is added, which spends verification credits.
- Add Sending Accounts to a Campaign Attaches email accounts to an existing ReachInbox campaign so that it sends from them.
- Add to the Blocklist Stops ReachInbox from emailing certain addresses, whole domains or leads whose details match Keywords. Use Reply Keywords to halt further emails when a reply contains a phrase such as an unsubscribe request.
- Connect an Email Account Registers a mailbox as a sending account. Set First Name and Last Name for the sender name, and turn on Reconnect an Existing Account to refresh an address that is already added.
- Copy Leads from a List into a Campaign Copies leads from a lead list to a campaign. Use Email Contains to copy only matching addresses and Skip Lead IDs to leave particular leads out.
- Create a Campaign Adds an empty campaign called Name to ReachInbox and returns its ID with the created and updated times.
- Create a Deliverability Test Sets up an inbox placement test that counts messages landing in the inbox and in spam. Add a Description to note what the test is for.
- Create a Lead List Makes a new lead list under a Name that must not already be in use, and returns its Core Variables and lead count.
- Create a Workspace Creates a workspace under your account. The API key of the new workspace is shown once and your plan limits how many workspaces you can have.
- Create Tags Adds new tags to your account in one request. Fill Tag This Campaign or Tag These Accounts to apply them straight away.
- Delete a Deliverability Test Removes an inbox placement test from ReachInbox.
- Delete a Lead List Deletes a whole list of saved leads from ReachInbox.
- Delete a Sending Account Deletes one mailbox from ReachInbox. This cannot be undone.
- Delete Leads from a Lead List Removes leads out of a lead list. Use Apply To to name individual leads or clear the whole list.
- Delete Sending Accounts Deletes many mailboxes at once, either selected Sending Accounts or every account via Apply To set to All.
- Duplicate a Campaign Makes a copy of a campaign, titled with Name of the Copy.
- Duplicate a Deliverability Test Copies an inbox placement test to run it again, titled with Name of the Copy. The new test returns its ID and settings.
- Enable the Warmup Turns on warmup for selected sending accounts, or for every account when Apply To is set to All.
- Make an API Call Makes an authorized free-form request to the ReachInbox REST API with your saved credential.
- Mark a Conversation as Read Flags one inbox conversation as read, from the Message ID shown by List Inbox Conversations.
- Mark a Conversation as Unread Sets one inbox conversation back to unread. Use the Message ID of the conversation.
- Mark All Conversations as Read Marks every unread conversation as read, limited to chosen Campaigns or spanning the whole inbox via Apply To.
- Move Campaigns to Another Workspace Moves campaigns into a different workspace. Leave New Workspace ID empty to send them back to your main workspace.
- Pause a Campaign Halts sending for a campaign until you start it again.
- Pause a Repeating Test Pauses an automated deliverability test that repeats on a schedule.
- Pause the Warmup Stops warmup on selected sending accounts, or on every account through Apply To.
- Remove a Sending Account from a Campaign Detaches one mailbox from a campaign, which stops that campaign sending from it.
- Remove a Tag from Campaigns Removes a tag from several campaigns at once. A tag left on no campaigns is deleted.
- Remove a Tag from Sending Accounts Detaches a tag from selected mailboxes.
- Remove from the Blocklist Deletes entries from a blocklist, either selected entries or the entire list via Apply To.
- Rename a Deliverability Test Rewrites the Name and Description of an inbox placement test.
- Rename a Lead List Gives a lead list another Name in ReachInbox.
- Resume a Repeating Test Restarts an automated deliverability test that was paused.
- Run a Deliverability Test Starts an inbox placement test that already exists in ReachInbox.
- Run an Action on Leads Applies one Action, such as verify, copy or move, to chosen leads of a campaign or to all of them. Set Target Campaign for the copy and move actions.
- Send an Inbox Reply Replies to a lead inside an existing conversation, with the reply text as HTML. Add further keys such as attachments with Extra Fields (JSON).
- Set a Conversation Status Sets an inbox conversation to Lead, Interested, Not Interested or another interest status in ReachInbox.
- Set the Emails of a Campaign Writes the email sequence of a campaign from Email Steps. Send every step each time because the whole sequence is replaced.
- Set the Schedule of a Campaign Defines when a campaign may send, from a Start Date to an End Date within the Sending Hours. That replaces the whole schedule.
- Start a Campaign Launches a campaign so it begins sending to its leads.
- Tag a Campaign Applies Tags to a campaign in ReachInbox, so the campaign carries those labels.
- Tag Sending Accounts Applies tags to selected mailboxes. Use Leave Out to skip particular accounts.
- Update a Campaign Renames a campaign with Name or sets its Deal Value. Use Clear Fields to remove the deal value.
- Update a Deliverability Test Configures an existing placement test. Use Test Type to switch the type, Campaign with Step Number and Variant Index to test a campaign email, or Subject to override the subject line.
- Update a Lead Edits a lead in a campaign, matched by Lead ID or Email. Change Notes, Lead Status or Custom Fields, and enable Keep Existing Custom Fields to merge instead of replace.
- Update a Lead on a Lead List Replaces the Custom Fields of a lead stored on a lead list. Give the Lead ID or the Email of that lead.
- Update Campaign Settings Tunes campaign sending limits such as Daily Limit and Max New Leads, plus Minimum Extra Delay and Maximum Extra Delay.
- Update Sending Accounts Edits settings of many mailboxes together, including Signature, Reply-To Address, Tracking Domain and Daily Campaign Limit.
- Update the Mail Server Details of an Account Changes the IMAP and SMTP settings of a mailbox, such as IMAP Host, IMAP Port and IMAP Username.
How to integrate ReachInbox in automation workflow?
ReachInbox in three steps: start with "Watch Events (Instant)", connect one credential, then add your next step.
STEP 1
Select ReachInbox in workflow
Add the "Watch Events (Instant)" trigger from ReachInbox to the canvas[4].
STEP 2
Connect ReachInbox
Fill in the ReachInbox credential once. All 82 ReachInbox modules use it[3].
STEP 3
Build a workflow
Add "Check a Tracking Domain" or "Count Unread Conversations" after it, then connect any app[5] or the HTTP node.
How ReachInbox connects and integrates with WEXTL
Save and approve your credentials once. WEXTL® stores authorization information encrypted and reuses the authentication whenever ReachInbox app is called in workflows. That allows your marketing automations to run without your attention, per defined schedule[7]. See the integration guide[6] for a detailed list of fields that ReachInbox supports.
Full ReachInbox API documentationThe following table illustrates what fields ReachInbox integration require during authorization flow inside our workflow builder[4].
Connect ReachInbox
API Key*Text
••••••••
| Field | Type | Help |
|---|---|---|
API KeyRequired | password | In ReachInbox, open Settings, then Integrations, then API, and copy the key for your workspace. |
Connect ReachInbox to popular apps on WEXTL
Enter a name of the other app you want to sync with ReachInbox below. Click on selected app to explore integration options with ReachInbox. If the app you search for is not available in WEXTL yet, you can use HTTP node[10] instead to integrate it directly.
Example automation with ReachInbox integration
Select Watch Events (Instant) trigger from ReachInbox - this will be a starting point in your automation. Whenever event happens in ReachInbox, workflow will start[7] from Watch Events (Instant) node.
Search for Add Leads to a Campaign, connect it as the next step of integration sequence. You can use filters between Watch Events (Instant) and Add Leads to a Campaign, so only important data pass from Watch Events (Instant) to the next step. WEXTL gives you full control over the process of ReachInbox automation. All parts of workflow are visible on the canvas[4].
ReachInbox on WEXTL has 83 modules for combining marketing automations. Explore ReachInbox documentation for more.
- ReachInboxWatch Events (Instant)
- SwitchyPerforms action
OR
- SwitchyTriggers
- ReachInboxAdd Leads to a Campaign
Frequently asked questions
Common questions about automating ReachInbox in your workflows.
What triggers does ReachInbox support?
ReachInbox has 1 trigger, including "Watch Events (Instant)". Triggers are start points of the workflow, and automations may start from them.
What actions can I run in ReachInbox?
Integration has 82 actions, including "Check a Tracking Domain", "Count Unread Conversations", and "Download an Attachment", and more. Refer to our ReachInbox Documentation for detailed inputs and outputs.
Do I need to write code to build automations?
No. The 82 ReachInbox modules, like "Check a Tracking Domain", are forms on the canvas: pick a field, map data from an earlier step. Code is optional[4].
Is the integration secure?
Yes. You fill in the ReachInbox credential once. WEXTL encrypts it at rest, and only your team can use it.
How does WEXTL integrate with ReachInbox?
Through the official ReachInbox API: 82 modules, plus "Make an API Call" for any endpoint they don't cover[3].
Can I use webhooks with ReachInbox?
Yes. "Watch Events (Instant)" is instant: ReachInbox pushes each event, so there is no polling delay.
Why use WEXTL platform for ReachInbox automation?
WEXTL is an AI-first visual canvas: describe the ReachInbox flow in plain words and AI wires the nodes[4].
References
List of sources used to gather information about the ReachInbox integration.
- ReachInbox integration source code, module specs and credentials implementation.
- Internal ReachInbox integration documentation, structured input and output parameters, scopes, and authentication methods.
- Official ReachInbox vendor API documentation, used to verify field meanings, authentication flows, and anything our own specs don't fully capture.
- WEXTL® Visual Workflow Builder, anonymized data from our technical support team.
- WEXTL® Apps Library
- WEXTL® ReachInbox App Documentation
- WEXTL® Workflow Scheduler
- WEXTL® HTTP node documentation
How we write and maintain ReachInbox app documentation
Explore how WEXTL® crafted ReachInbox integration page documentation. Used sources, the role of AI, and how the team validates the result.





















